layout - portrait

[pat-wmw]

Printing to primo from acad, all pdf output is portrait, can not get landscape , even after configuring primo for landscape and saving the pc3. How do I get an autocad drawing output in landscape layout?

[Douglas Saltsman]

Printing to primo from acad, all pdf output is portrait, can not get landscape , even after configuring primo for landscape and saving the pc3. How do I get an autocad drawing output in landscape layout?


You can change the printer options by right clicking the primo printer and choosing properties. On the general tab you should see a button for printing preferences. You will then see an option for layout to be either portrait or landscape. This should allow you to print your pdfs in landscape mode.

[jksmurf]

Hi,

I have the same problem as the previous poster, but in trying to print GRAPHS (CHARTS) ONLY from Excel. I have tried several combinations of Landscape/Portrait, Landscape/Landscape, Portrait/Landscape, Portratit Portrait in the Page Setup/Print Setup menus, but to no avail.

Any help would be appreciated.

Rgds

Kristian

[jksmurf]

Hi,

Wondering if there was anyone out there who had a solution to the above? In Excel?

Kristian

[Poidog]

I just started using it today, had the same problem (Excel file in landscape view converts to PDF in portrait view; Excel cells sideways), searched for "Excel" in the forums, saw Douglas's suggestion, tried it, but it doesn't work.

I have to manually rotate the PDF to see it the right way but people should not have to do that to view it. However I created the file should be shown that way in PDF.

I'm surprised there is no response for so long unless it's still a bug being worked out but there are only 18 threads with "Excel" in them and this thread is the only one that pertains to my problem.

[jksmurf]

Yep. Come on fellers, how about getting this fixed :-)

k.

[kschu72]

Converting PowerPoint file to PDF -- file is landscape but converts over into portrait mode. Can change to landscape, but when file is saved it reverts back to portrait. Need file format to stay in portrait. Why doesn't file stay in default mode? Any suggestions?

[Hazardman]

pat-wmw...

i use acad 2002 lt and have been succesfull in plotting portrait mode using the "print" setting...this is what i've figured out...

in the printing preferences... of the primopdf printer (v2 btw) choose landscape...also in the advanced tab select ledger as the paper size...

in autocad choose PrimoPDF as the printer (the direct driver and not the *.pc3)...then in the plot settings page choose ledger as the paper size and portrait as the orientation (you may need to flip back and forth between the two modes to get it going)...hit plot...

hope this works for you--and any other with similar problems...

[edit]

just did an experiment where i placed the primopdf printer back to letter & portrait mode then tried the ledger size in acad...it still works, but this time i had to use landscape mode...go figure...

hm

[Matija Golar]

go to:
start -> settings -> printers&faxes

in window wher you can see all your printers

select

File -> server properties

there you can see all forms

A3 is defined as 297 wide and 420 tall which gives you your PORTRAIT problem

whereas adding A3landscape 420 wide 297 tall will solve your problem


how-to:

in forms tab (to where i've navigated you in begining of post)

select A3 Rotated (so new form will retain its settings), click new form, name it A3landscape (or whatever suits you)

all new forms you define will be available for you in primo pdf

and if primopdf would offer A3 Rotated from default set, that would done the trick

BUT you may have to print in PORTRAIT orientation to A3landscape to get what you want, as it turned out in my case.

Have fun :)

:( --> :D

Matija

:)

[jarble187]

Printing to primo from acad, all pdf output is portrait, can not get landscape , even after configuring primo for landscape and saving the pc3. How do I get an autocad drawing output in landscape layout?


I have been having this same problem for years with PrimoPDF, however, today, we got two new computers in the office and I installed Primo PDF on both machines. I set them both up exactly the same way. We use Arch D paper size, which I manually set up in the custom settings, as 36 inches wide by 24 inches long. I select landscape in Autocads setup, and select Landscape in Primos Setup. One computer plots the PDF in landscape view, with the paper layout oriented the correct direction, the other machine changes the orientation to vertical, even though it is set up as landscape. How could I of set up both machines the same way but get different results? I would like for the orientation of my plots to be correct. If I select Landscape, why will Primo not orient it in that direction? I have tried following the comments in the previous posts, but no luck. Any Help?

[Poidog]

I don't want to download v.3, have it not work, then not be able to download v.1 again since it's not available from this site anymore (I didn't save the executable file and I read that you should uninstall any previous version before downloading v.3).

Can anyone who has downloaded v.3 confirm that you can convert landscape documents into PDFs correctly?

Thank you.

[Natcha Roongrote]

It's an issue in the ghostscript library that PrimoPDF is using. This landscape issue will be addressed as soon as the issue is resolved in the future build of ghostscript library.

[jarble187]

I have been having this same problem for years with PrimoPDF, however, today, we got two new computers in the office and I installed Primo PDF on both machines. I set them both up exactly the same way. We use Arch D paper size, which I manually set up in the custom settings, as 36 inches wide by 24 inches long. I select landscape in Autocads setup, and select Landscape in Primos Setup. One computer plots the PDF in landscape view, with the paper layout oriented the correct direction, the other machine changes the orientation to vertical, even though it is set up as landscape. How could I of set up both machines the same way but get different results? I would like for the orientation of my plots to be correct. If I select Landscape, why will Primo not orient it in that direction? I have tried following the comments in the previous posts, but no luck. Any Help?

Im going to bump this thread- Today, the one machine that worked right is now printing stricty in portrait. Why the change all of the sudden? I have uninstalled Primo and reinstalled, but no luck. This has to be one of the most frustraiting printing problems I have ever had. Will there ever be a fix for this?

[jarble187]

I was going to download v1.0, as that seems to be the only fix that this forum has to offer, but it appears the download has been removed by primopdf. Im going to start looking elsewhere for other software.

[jarble187]

Just an FYI- I downloaded and installed version 3 to a third machine in our office. The layouts work fine, no problems. So I am completely unsure why version 3.0 on my machine worked for several weeks before I started having problems. Even after an uninstall and fresh re-install, still no luck on my machine. Its making me wonder if primo isnt writing over some printing related file on my computer that is not related to primo causing this error? Why does Primo work on some machines and not others? There must be a specific bug.

[jarble187]

**Im Bumping this thread...would like some help**

[jarble187]

I just found out that if I switch the print setup from print to screen, then the orientation plots correct and displays itself properly in acrobat. However, I am wondering if I am sacraficing image quality by changing the setup?

[Caden]

It's an issue in the ghostscript library that PrimoPDF is using. This landscape issue will be addressed as soon as the issue is resolved in the future build of ghostscript library.

What's the status on this? Has it been released yet?

[jksmurf]

What's the status on this? Has it been released yet?

I second that. Be great to see a time scale on this one being corrected.
Thanks!

k.

[dropship-dvd]

www.hw925shop.com is a professional Tiffany jewelry supplier for 3 years and won the good reputation on this line. The products of us are the best quality in china and the lowest price(not cheap bootleg), including the necklace ,cuff , ring ,earring . as 1837 style , round / heart tag style , Atlas style , Titanium style and so on . Pleasure more EBAY resellers join our company and enjoy our service. Since we are mate wholesaler and dropshipping servicer who can help you feel confidence to set up a steady business.To be exactly, you may have all kinds of questions from beginning If you're looking for a good source of wholesale Tiffany for your retail operation, online store or auction business, www.hw925shop.com is your one-stop shop for wholesale .hope you will get more surprise items on our website .
Wecome to our website: www.hw925shop.com
Email: hw925shop@163.com
MSN: hw925shop@hotmail.com

[dropship-dvd]

www hw925shop com are the biggest DVD,VCD,MOVIE,TV SHOW,etc wholesaler in China, hw925shop offer WHOLESALE & DROPSHIP DVD MOVIE BOX SETS all over the worldwide. All of items are high quality and competitive price.
Hw925shop have the professional dropship DVDS service? The dropship service is a no investment,no inventory,no risks,We package your orders and ship them to your customers directly through EMS express with online tracking available.No minimum order.

Product list:West Wing,Veronica Mars,The Lord of the Rings Trilogy,Golden Girls,Dead Zone,Apprentice,Star Trek Enterprise,Star Trek Deep Space Nine,SIX FEET UNDER,Roswell,OZ,NYPD Blue,Nip Tuck,MASH,Married with Children,Grey's Anatomy,Frasier,Everybody Loves Raymond,ER,Desperate Housewives,Deadwood,CSI MIAMI,Charmed,Band of Brothers,friends,Simpsons,Star Wars,Sopranos,CSI,24 HOURS,South Park, THE L WORD,star gate,007,
Baby Einstein,Monk,seinfeld,The Shield,OC,babylon,Queer as folk,Will And Grace,profiler,Alias,ANGEL,STAR TREK VOYAGER,
Star Trek The Next Generation,SEX AND THE CITY,x-Files,Ally Mcbeal,Xena Warrior Princess,STAR WARS,Star Trek The Original Series,Smallville,PROJECT RUNWAY,Medium,FAMILY GUY,Disney 100 Years of Movies,Buffy the Vampire Slayer,Black Adder,Barbie,Baby Einstein Language Nursery,Addested Development,Without A Trace, etc.

All DVDs are officially released Asian version with best quality.
Brand new and factory sealed, come with original English audio
Region free, NTSC/PAL compatible, will play on all region code DVD players.
(All of DVDS are US Version DVDs without Chinese writing on the cover to help you selling easier on ebay )
Please visit our website: www hw925shop com
Email: hw925shopservice@yahoo.com.cn
MSN: hw925shopservice@hotmail.com

[retailremedy123]

We adjust the two preferences as we choose the style of it. You can have both the versions in primo PDF suite which can enable you to get the good quality standards. i have got this style for my retail layout (http://www.retail-remedy.com) site.